Perle 10/100/1000 Ethernet Media Converter
Installation Guide
8
Note: When Auto Negotiation (SW1) is set to Off, the media
converter will use this Duplex setting for its copper connection.
Up: In the Up switch position, the media converter will be set to
Full Duplex mode.
Down: The media converter will be set to Half Duplex mode.
Speed copper (Switch 5)
Switch Position
Mode
Up (default)
100
Down
10
Note When Auto Negotiation (SW1) is set to Off, the media
converter will use this switch setting for its Ethernet copper speed
connection.
Up: When Switch 5 is in the Up position, the S-1110 will force the
speed to 100 Mbps.
Down: When switch 5 is in the Down position the media converter
will force the speed to 10 Mbps.
When using a Gigabit SFP module)
Fiber Negotiation (Switch 6)
Switch Position
Mode
Up (default)
Auto
Down
Off
Up:
The Media Converter will negotiate Ethernet parameters on
the fiber connection. This will ensure that the most optimal
connection parameters will be in effect. If connecting to another
Perle Media Converter, this parameter should be set to Auto. The
Media Converter Module will advertise 1000Mbps, Full and Half
Duplex, no Pause.
Down:
The Media Converter Module’s fiber will be fixed to
1000Mbps, Full Duplex.
