Perle 10/100/1000 Ethernet Media Converter
Installation Guide
5
DIP Switches
The DIP switches are accessible through the opening in the side
of the enclosure.
Note:
All switch changes take effect immediately and will result in
a link reset on both ports.
DIP Switch Settings
Auto Negotiation copper (Switch 1)
Switch Position
Mode
Up (default)
Auto
Down
Off
Note: Auto negotiation should only be turned off, if the copper link
partner does not support Auto Negotiation and fixed settings are
required by the copper link partner.
Auto: When enabled, the media converter will negotiate with its
link partner to determine the most optimal parameters for this
connection. The S-1110 will advertise capabilities of 10,100 and
1000 Mbps, full and half duplex as well as pause, and remote fault
capabilities to the link partner.
If the copper link partner does not support Auto negotiation, the S-
1110 will parallel detect to 10 or 100 Mbps and force Half Duplex
mode as per IEEE specifications.
