manualshive.com logo in svg

Perle P1705, User And System Administration Manual

Share
Download
Perle P1705 User And System Administration Manual Download Page 6

Contents

Configure Remote Site Profiles ............................................................................37

Configure Remote Site Profiles for ISDN PPP........................................................ 38

Configure Remote Site Profile for Frame Relay ....................................................... 40

Configure Remote Site Profiles for Leased Line PPP ............................................. 43

Configure Remote Site Profiles for  Frame Relay with ISDN backup ................. 45

Configure Remote Site Profiles for PPPoE............................................................... 46

Advanced Features .................................................................................................50

Configure Dynamic Host Configuration Protocol................................................... 50

Network Address Translation and Port Translation................................................ 52

Security............................................................................................................................. 54

IPSec Protocol Suite................................................................................................................ 54
Internet Key Exchange (IKE)................................................................................................ 61
Configure PPP Security........................................................................................................... 64
Configure Firewall.................................................................................................................... 66
Network Address Translation................................................................................................ 69
Filters.......................................................................................................................................... 69

Compression ................................................................................................................... 69

Bandwidth On Demand................................................................................................ 70

QOS - Priority Queuing................................................................................................ 71

Simple Network Time Protocol (SNTP).................................................................... 73

3

INTRODUCTION TO FILTERING

75

MAC Address Filtering..........................................................................................75

Pattern Filtering..............................................................................................................75

Popular Filters.........................................................................................................77
Bridge .......................................................................................................................77

IP & Related Traffic....................................................................................................... 77

Novell IPX Frames ........................................................................................................ 77

NetBIOS &NetBEUI (Windows For Workgroups)................................................ 77

Banyan.............................................................................................................................. 77

IP Router..................................................................................................................78

NetBIOS over TCP ....................................................................................................... 78

Other interesting TCP Ports ........................................................................................ 78

APPENDIX A MENU TREES

79

APPENDIX B OCTET LOCATIONS ON  ETHERNET FRAMES 84

Octet Locations on a Bridged TCP/IP Frame...................................................84
Octet Locations on a Bridged Novell Netware Frame .....................................85
ETHERNET Type Codes ....................................................................................85
Octet Locations on an IP Routed TCP/IP Frame............................................86
Octet Locations on an IPX Routed Novell Netware Frame ...........................86
Octet Locations on a Bridged XNS Frame ........................................................87

APPENDIX C SERVICING INFORMATION

88

Opening the case ....................................................................................................88
Identifying the Internal Components ..................................................................89
To Clear a “Lost” Password .................................................................................90
Changing LAN or WAN Interfaces.....................................................................90
Selecting MDI or MDI-X LAN Interface...........................................................90

Summary of Contents for P1705




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands