Installation
8
Mandatory Configuration
The P1705 & P1730 requires a minimum amount of mandatory configuration in order to
operate. The following table identifies the configuration parameters that must be defined
for proper operation under the operational states shown in the table.
Bridge
IP Router
IPX Router
none
IP Address
none
ISDN - U
ISDN – S/T
PPP ISDN
ISDN Switch Type
ISDN Switch Type
B channel assignment
Directory Numbers
Directory Numbers
Remote Site Profile
Frame Relay
Lease Line
PPP Lease Line
none (North America)
none
none (International)
Remote Site Profile
Frame Relay enabled
(International only)
Frame Relay disabled
(North America only)
The configuration options required for proper initial operation are described in Section 2:
Typical Applications and How to Configure Them. Each configuration requires a different
set of parameters to be entered.
Refer to Section 2 for details on configuring the P1705 & P1730 in different operational
states. Also refer to the P1705 & P1730 VPN Menus Manual file for your operating
software on the accompanying CD-ROM for a complete description of all the Menu
Options.
Other options may be changed depending upon specific installation configurations. Refer to
the menu tree in Appendix A for a reference of the menu structure and options.
