background image

 

IDS-205G Switches 

Quick Start Guide 

____________________________ 

This guide covers the basic installation and configuration. It is intended for first time 
setup or for product evaluation purposes.  
 
Complete details can be found in the following guides a

www.perle.com/downloads

. 

 

IDS-205G Hardware Installation Guide 

 

IDS Managed Switches User Guide 

 

IDS Managed Switches CLI Guide 

What’s in the box? 

 

The IDS switch 

 

Quick Start Guide (this document) 

 

Hardware Overview 

 

Summary of Contents for IDS-205G

Page 1: ...s intended for first time setup or for product evaluation purposes Complete details can be found in the following guides at www perle com downloads IDS 205G Hardware Installation Guide IDS Managed Switches User Guide IDS Managed Switches CLI Guide What s in the box The IDS switch Quick Start Guide this document Hardware Overview ...

Page 2: ... 7 8mm 5 16 3 Loosen the terminal block screws and connect positive negative wires in the terminals 4 Tighten terminal screws 0 51Nm torque Ensure the wires are securely fastened 5 Re insert the terminal block connector if removed Turn power on at source Check LED indicators for status 6 Connect P2 power source 2 beginning at Step 1 For complete wiring instructions and for all Hazardous Locations ...

Page 3: ...us Green blinking System booting Green solid System operating normally Green blinking fast Fast Setup mode activated Red Hardware fault or firmware load error 5 Port 5 Fiberport Link Activity Off Link down Green flashing Link and activity Green blinking slowly Port in error disable or suspend state Ethernet Port Link Speed Green and Yellow LEDs 1000 Mbps Green on Yellow off 100 Mbps Green on Yello...

Page 4: ...on is recessed in the switch a small tool such as a paper clip will be required The yellow and green LEDs on an empty RJ 45 connectors will flash rapidly to indicate where to plug in the Ethernet cable from your PC 3 Using a web browser enter to a well known webpage such as www google com you will be automatically directed to the IDS Get Started screen Note While in Fast setup mode the IDS switch ...

Reviews: