Installation 24
IDS-509-SFP Hardware Installation Guide
Fast Setup Mode
This allows you to perform initial configuration of the switch using your Web browser.
Fast Setup Mode can be activated when the switch is in Factory Default. When started up
in this mode, the switch assigns itself an IP address and also assigns an IP address to the
connected PC. This makes it possible to initiate a Web session and the use of the Fast
Setup configurator. Switches are shipped in Factory default mode. Refer to the Quick Start
Guide that came with the switch for instructions on how to connect to the switch for the
first time.
Password Recovery
When the switch is not in factory default, the "Fast Setup Mode" sequence will activate
Password recovery.
Note
: The password recovery feature can be disabled in the software.
SYS
Green blinking - Boot process underway.
LED
Behavior
LED
Behavior
PWR
Press and hold the Reset/FS button.
Release button when LED changes from
Red to Yellow.
Port Link
/ Speed
Rapid blinking on the first available RJ-
45 port to which the PC can be connected.
LED
Behavior
ALR
On solid - during reset process
Off - to indicate that reset has completed
Summary of Contents for 07016830
Page 31: ...Appendix B Sample Labels 29 IDS 509 SFP Hardware Installation Guide Appendix B Sample Labels...
Page 33: ...Appendix C Mechanical Drawings 31 IDS 509 SFP Hardware Installation Guide...
Page 34: ...Appendix C Mechanical Drawings 32 IDS 509 SFP Hardware Installation Guide...
Page 35: ...Appendix C Mechanical Drawings 33 IDS 509 SFP Hardware Installation Guide...
