104
SEBU8605-01
Maintenance Section
Fuel System Secondary Filter - Replace
g02546439
Illustration 73
Typical example
3.
Make a temporary Mark (A) across the
fi
lter before
the assembly is removed. Install a suitable tube
onto drain (4). Open the drain valve (3). Rotate
the drain valve counterclockwise. Two full turns
are required. Loosen vent screw (1).
Note:
Two complete rotations of the valve will release
the valve from the
fi
lter element.
4.
Allow the fuel to drain into the container. Remove
the tube and install the valve into the
fi
lter element.
Engage the threads of the valve into the
fi
lter
element. Do not secure the valve.
5.
Tighten the vent screw (1) securely.
6.
Remove the
fi
lter bowl (2). Rotate the
fi
lter
assembly counterclockwise in order to remove the
assembly. Use a suitable tool in order to remove
the
fi
lter bowl.
g02546456
Illustration 74
Typical example
7.
Rotate the
fi
lter element counterclockwise and
remove the
fi
lter element (5). Clean the
fi
lter bowl.
Install the Element
g02148528
Illustration 75
Typical example
1.
Locate the thread in the
fi
lter element (7) onto the
threads (8). Spin on the element. Do not tighten.
2.
Lubricate the O ring seal (6) with clean engine oil.
Do NOT
fi
ll the
fi
lter bowl (2) with fuel before the
fi
lter assembly is installed.
