30 . Spectrum RX I Getting Started Guide
5.
Push the wrench down through the hole in the metal plate and onto the
top of the adjustment screw below (a depth of about 11.5 cm) as shown
in Figure 9. Rotate the wrench until it drops into the top of the
adjustment screw.
6.
Give the screw a quarter-turn clockwise and then a quarter-turn
counterclockwise to familiarize yourself with the feel of turning the screw.
7.
Remove the hexagonal wrench.
8.
Close the main cover and lock it by turning the locking screw clockwise
until it becomes difficult to turn.
Do not overtighten the locking screw because this may cause damage to
the main cover.
9.
Push the Spectrum RX I back on the bench, to the position required.
Unpacking the Screen
1.
Carefully remove the screen from the shipping carton.
NOTE:
We recommend that you do not attach the base supplied with the
screen. With the screen in the lower position there is a better visual
alignment between the soft keys on the Spectrum RX I keypad and the
soft key labels that will appear at the bottom of the screen.
