14
United States (FCC)
This instrument is classified as a digital device used exclusively as industrial,
commercial, or medical equipment. It is exempt from the technical standards
specified in Part 15 of FCC Rules and Regulations, based on Section 15.103 (c).
Environment
Operating Conditions
Pollution Degree
This equipment will operate safely in environments that contain non-conductive
foreign matter up to Pollution Degree 2 in EN 61010–1.
Recommended operating conditions:
• Indoors.
• The location must be free of smoke, dust, corrosive fumes, direct sunlight
and excessive vibration.
• Ambient tempe15
C to +35
C (+59
F to +95
F), with a
maximum change not exceeding 2.8
C (5
F) per hour. For optimum
instrument performance, the room temperature should be controlled at 20°
± 2 °C (68° ± 2 °F).
• Relative humidity 20% to 80%, without condensation.
• Altitude in the range -400 m to 2,000 m (-1,312 ft. to 6,562 ft).
Safe operating conditions:
• Indoors
Explosive Atmosphere
This instrument is not designed for operation in an explosive atmosphere.
Avertissement : atmosphère explosive
Cet instrument n'est pas conçu pour fonctionner dans une atmosphère
explosive.
!
Warning
Summary of Contents for AVIO 500
