Wireless Pan & Tilt IP Surveillance Camera
Step 4.
Default connection mode selection is Manual, i.e. STATIC.
Step 5.
Type in Fixed IP.
IP Address : 211.78.174.94
Net Mask: 255.255.255.248
GateWay : 211.78.174.89
Step 6.
HTTP Port:Http communication port. The default setting is 80.
(If you have multiple IP-CAMs installed in the same network, you have to divide them with different
Port numbers, e.g, 1025
、
1026
、
1039…..)
Step 7.
After finishing the settings, click Setting to send. The network settings for this IP-CAM are renewed.
4.
5.
6.
7.
Figure
- Fill in Fixed IP Address as below. (If you do not know your fixed IP address, please contact with
your ISP. Below is an example of Fixed IP Address modification.)