background image

14

Owner’s Guide

 

PWF-100

•  Your system’s performance is enhanced 

providing the SmartStation

 a clear “line 

of sight” such as a table in front of a 
window. Keep your SmartStation

 off the 

fl oor and elevated on a table or shelf.

•  You can place the SmartStation

 on a 

home’s second story.

•  All radio signals are blocked or 

refl ected by metal objects and can 
cause signifi cant disruption to your 
system’s reception! Keep clear of metal 
furniture, duct work, metal studs or 
buildings. 

Hilly Terrain and your Wire-Free system

Unlike other wireless systems, the Wire-
Free radio frequency signal is not affected 
by most terrain. The Wire-Free fence’s 
effective range will be reduced over hilly 
terrain only if the indoor SmartStation

 

base station loses direct line of sight (such 
as over a steep hill) with the dog’s collar. 

Wire-Free is unique in that the indoor 
SmartStation

 will actually benefi t from 

a higher location in the house, such as a 
second story, to improve its “line of sight” 
with the PetLink

 collar when dealing with 

diffi cult terrain issues or other obstacles. 

Setting the Boundary

Understanding the system SLEEP MODE

In order to conserve the maximum amount 
of battery power, the PetLink collar will 
enter SLEEP MODE when the collar is not 
in motion, such as when your dog is sleep-
ing or the collar is simply off the dog sitting 
on a table. You can determine the collar is 

asleep by looking at the “L” shaped icon 
in the SmartStation

 screen. When your 

pet moves the L icon will rotate clockwise. 
When the collar is at rest the icon will 
remain still. 

Due to the 
SLEEP MODE, 
it is important 
to “jiggle” the 
PetLink

 collar 

during setup 
functions for the 
SmartStation 
and PetLink

 col-

lar to maintain constant contact between 
the SmartStation

 and the PetLink

 collar.

After carefully selecting a location for 
the system SmartStation

, you can now 

defi ne the outside boundary area. Keep in 
mind, that although the Wire-Free system 
can cover an area as large as 2 ½ acres, 
your property lines will dictate how large 
of a circular area you can cover with your 
fencing system.

•  Push the center SELECT button on the 

indoor SmartStation

.

•   The SmartStation

 screen will read- 

MENU: Boundary

•  Press and release the RIGHT arrow (>)

•  Hold the PetLink

 collar by the nylon 

strap approximately knee high.

IMPORTANT:

 Make sure to jiggle the 

collar as it is walked around the yard to 
ensure that the SmartStation

 continues 

to receive continuous data from the collar.

STEP 5

Summary of Contents for PWF-100

























Reviews: