8
Pic 10
Pic 11
Pic 12
Pic 13
7. Slide the left hand shifter wire into a cable tube and also route it
along the tie rod.
8. Route the front shifter cable through the cable guide below the
boom and then into the guide on the boom itself. Insert the shifter
wire into the front derailleur, tighten the wire screw, and seal the
end with a provided wire cap.
Brake Cables
Front brake cable (right hand):
1. Squeeze the brake lever to open it up and place the head of the
cable into the lever.
2. String the brake wire into a cable tube. (Pic 14)
3. Thread brake cable into brake arm and seal the end with a
provided cap. (Pic 15)
4. Attach the brake and shifter cables to the tie rod with a provided
zip tie. (Pic 16)
5. If the wheel drags slightly, adjust the brake pad by using the
brake pad adjusting knobs.
6. Repeat for the left slide.
Summary of Contents for JC26-X
Page 2: ...2...
