1 of 6
Assembly Instructions
GARAGE STORAGE SOLUTIONS
TALL CABINET
Model: GTC2DP
SKU: 211-4354
Safety Instructions
- Use caution when handling and assembling metal parts. The metal may have sharp edges or corners.
The use of protective gloves is recommended.
- This unit should be securely anchored to a wall with suitable fasteners (stud fastener included).
-
DO NOT
use this unit for anything that is outside the designed function of storage.
-
DO NOT
step or stand on the shelves.
- The maximum evenly distributed weight for each shelf is 100 lbs.
General Instructions
It is recommended that the cabinet be assembled by more than one person. During shipping and handling, some
of the tabs that are used for assembly may have closed together. Use a flat tipped screwdriver to either pry up or
push from behind the tab to re-open. To assure the squareness of the unit, do not fully tighten the nuts and screws
used in the assembly until all are in place. After all nuts and screws are in place, square the unit on a level surface
and tighten all nuts and screws appropriately.
Parts List & Product Specification
Tools Required
-Rubber Mallet
-Small Blade Screwdriver
-Philips Head Screwdriver
ASSEMBLY QUESTIONS: PLEASE CALL TOLL FREE (866) 441-5080
Ref#
Description
QTY
Ref#
Description
QTY
A
Right Hand Back
1
H
Left Hand Door
1
B
Left Hand Back
1
I
Right Hand Door
1
C
Right Hand Side
1
J
Bolt,M6*10
10
D
Left Hand Side
1
K
Nut,M6
10
E
Top
1
L
Leg leveler
4
F
Bottom
1
M
Screw
1
G
Shelves
3
N
Washer (stud attachment)
1
