BATTERY INSTALLATION/REPLACEMENT
MAINTENANCE AND STORAGE
ENVIRONMENT PROTECTION
• Do not dispose of electrically powered products with household wastes.
They should be utilized in proper plants.
• Obtain information on wastes utilization from your seller or local authorities.
• Used up electric and electronic equipment contains substances active
in natural environment.
• Unrecycled equipment constitutes a potential risk for environment and human health.
7
• Make sure the screws are properly tightened to be able to work safely. Use only original
accessories and original spare parts.
• If the device is not used, it should be stored in a dry place, away from children.
• If the cable is damaged, replace it with another one which has the same
characteristics. Entrust this operation to a qualified technician or a repair shop.
• All defects should be repaired by a service workshop authorized by the manufacturer.
1. Turn unit over to expose back. Press in the plastic tab on the right middle of the back
cover and lift up to open.
2. Use a #0 Philips screwdriver to remove the screw in bottom middle of the battery cover.
3. Remove cover and insert 4AA batteries as shown inside the compartment.
4. Replace screw.
