SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
WARNING. READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN FIRE, ELECTRICAL SHOCK, PERSONAL
INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or
maintain this product. Failure to comply with the instructions may result in serious personal injury and/or property
damage!
The following signal words are used to emphasize safety warnings that must be followed when using this
product:
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps
described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information
available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice.
DANGER Indicates an imminently hazardous situation that, if
not avoided, WILL result in death or serious injury.
WARNING Indicates a potentially hazardous situation that, if
not avoided, COULD result in death or serious injury.
CAUTION Indicates a potentially hazardous situation that, if
not avoided, MAY result in minor or moderate injury.
NOTICE Indicates important information, which if not followed,
MAY cause damage to equipment.
After opening the carton, unpack your new product and related parts & accessories. Please inspect it carefully for
any damage that may have occurred during transit. Please check it against the photograph on carton. If any parts
are missing, please call customer service at 1-800-426-1262 between 6 a.m. and 5 p.m. Pacific time.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Do not operate the product until the parts
have been replaced or the fault rectified. Failure to do so may result in serious personal injury or property damage. All damaged parts
must be repaired or replaced as needed prior to operating this product. Check to see that all nuts, bolts and fittings are secure before
putting this product into service. If you have any questions, or require assistance with damaged or missing parts, please contact our
factory customer service department at: 1-800-426-1262.
Please have the serial number, model number, and date of purchase available for reference when calling.
2
IMPORTANT SAFETY INFORMATION
TO PREVENT SERIOUS INJURY AND DEATH:
Always wear eye protection. Wear ANSI-approved safety goggles during use.
Before inspecting walls, shut off the circuit breakers to the whole house.
Before inspecting pipes that may contain an electric charge, have them checked by a qualified electrician.
Before inspecting an engine, turn off the automobile.
• Prevent liquid entry. Although the camera and cable of this item can be submersed the body of the tool cannot be submersed. Do
not immerse handle portion of the camera in any liquids, or use in a rainy or otherwise wet environment. The Camera Head and
Cable are rated to IP67.
• This unit is not shock resistant. Handle product with care and do not drop or expose to impact.
• Turn off unit when not in use. Remove batteries if unit will go unused over 30 days.
• Always use common sense and pay particular attention to all the DANGER, WARNING, CAUTION and NOTICE statements of this
manual. The safety instructions provided are not intended to cover all possible conditions and practices that may occur when operat-
ing, maintaining and cleaning power tools.
• Do not use the probe in acid, fire or other corrosive or extremely hot environments.
• Do not operate the Camera in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
• Do not allow oil or gas to remain on the camera head. Shut off vehicles during inspections.
• Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain or snow.
• Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids. Do not bring
combustible materials near the tools. Power tools create sparks, which may ignite the dust or fumes. Do not immerse tool in liquids.
Keep work area clean, well ventilated and well lit. Cluttered work areas invite accidents.
• Use personal protective equipment. Wear ANSI approved safety goggles. Protective equipment such as dusk mask, nonskid safety
shoes, hard hat, heavy duty work gloves or hearing protection used for appropriate conditions will reduce personal injuries.
• Keep bystanders, children and visitors away while operating this product. Distractions can cause you to lose control.
• This product is not a toy. Do not allow children to play with or near this item. Use as intended only.
• Stay alert. Watch what you are doing, and use common sense when operating this tool. Do not use this product while tired or under
the influence of drugs, alcohol, or medication. A moment of inattention while operating this product may result in serious personal
injury. Keep proper footing and balance at all times. Do not reach over or across running machines, hoses, cords, etc.
