10
UV damage
Avoid leaving the wing out in the sun unnecessarily. UV rays from the sun degrade wing fabric.
Packing instructions
We advise you to pack the wing like an accordion. This packing procedure takes slightly longer and is easier to do with an
assistant. Since folding the wing may weaken some of the materials, pack the wing as loosely as possible.
Transport and Storage
Moisture is the worst enemy of your wing, adversely affecting the aging of fabric, lines and reinforcements. The Spire
should, therefore, be kept dry and cool. Do not pack the wing away for a prolonged period if it is damp, sandy, salty, or if
other objects have entered the cells. Always allow it to dry naturally before storage in a dry room. Leave the rucksack zip
open whenever possible to allow residual moisture to evaporate, and do not transport or store the wing in the proximity of
chemicals such as gasoline, paints or other solvents.
Cleaning
Use only warm water and a soft cloth to clean your wing. Never use any abrasive materials or detergents. Only clean the
wing if it is absolutely necessary such as after a landing in salt water.
Maintenance Inspections
Performance Designs recommends that an authorized Performance Designs agent inspects the Spire after every 100
hours flying time or every year, whichever comes first.
A full inspection will give you a peace of mind and extend your wing's lifetime. Additional inspections should be performed
by a qualified person following a crash or violent landing on the leading edge or if you note a deterioration of performance
or behavior. You should also check for any damage to your lines, sail, risers, and connectors before each flight.
Repairs
Very small holes in the fabric can be left intact; larger holes require sewn patches. Your Performance Designs dealer
should replace damaged lines. Before fitting a replacement line, check it for length against its counterpart on the other
Summary of Contents for Spire-08M
Page 1: ......
