manualshive.com logo in svg

Performance Designs Optimum OP-106, Manual

Share
Download
Performance Designs Optimum OP-106 Manual Download Page 6

 

MAN-0012 Rev. I 

P a g e

 | 3 

 

WET  CANOPIES: .......................................................................................................................... 19 

SECTION 5 .................................................................................................................................. 21 

Side and Frontal Views............................................................................................................... 21 
DEPLOYMENT SYSTEMS .................................................................................................................. 22 
REPACK CYCLES ........................................................................................................................... 22 
SERVICE LIFE .............................................................................................................................. 22 
COMPATIBILITY CHECK .............................................................................................................. 22 
ATTACHING THE RESERVE TO THE RISERS ........................................................................................... 23 
CONNECTOR LINKS ....................................................................................................................... 23 

STAINLESS STEEL LINKS ..................................................................................................... 24 
SLINKS ................................................................................................................................ 25 

ATTACHING STEERING LINES TO TOGGLES .............................................................................. 25 

TOGGLE    ATTACHMENT: MICROLINE STEERING   LINE WITH FACTORY MADE LOOP ................................................. 27 
TOGGLE ATTACHMENT: MICROLINE STEERING LINE ............................................................................ 28 
TOGGLE ATTACHMENT: DACRON/POLYESTER STEERING LINES .............................................................. 29 
PRO PACKING INSTRUCTIONS ................................................................................................................ 30 
APPENDIX ................................................................................................................................... 38 

FLAT PACKING INSTRUCTIONS ................................................................................................... 38 

PD SERIES SPECIFICATIONS ......................................................................................................... 39 
OPTIMUM SERIES SPECIFICATIONS ................................................................................................ 39 

 

 

 

Summary of Contents for Optimum OP-106
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands