MAN-0012 Rev. I
P a g e
| 33
6)
Hold the canopy parallel to
the floor with the nose facing
down as shown. Continue to
hold the lines in one hand
while using your free arm to
support the canopy fabric.
While maintaining even
tension on the lines, gently
place the canopy back down
on the floor or packing table
with the nose facing down.
7)
Starting on the right side of
the canopy, carefully lift the
folds of material back towards
the center of the pack job until
the nose is exposed. Clear the
three cells to the right of the
center cell and flake this
section of the nose toward the
outside of the pack job.
Note: references to the right
and left sides are from the
canopy pilot’s point of view.
