LANGUAGES
The menu of the radio can be configured to various languages.
1. Press the
On/Off button
to turn on the radio.
2. Press the
Menu button
, and then rotate the
Tuning knob
until the display shows
“System”.
3. Press the
Tuning knob
; rotate the
Tuning knob
until the display shows “Language”.
4. Press the
Tuning knob
to enter the language adjustment menu.
5. Rotate the
Tuning knob
until the desired language appears on the display (default
is English).
6. Press the
Tuning knob
to confirm your choice. The display menu will change to the
chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view
the software version in DAB and FM mode.
1. Press the
On/Off button
to switch on the radio.
2. Press the
Source button
to select FM or DAB mode.
3. Press the
Menu button
until the display shows “Full Scan”, and then rotate
the
Tuning knob
until the display shows “System”.
4. Press the
Tuning knob
; rotate the
Tuning knob
until the display shows
“SW version”.
5. Press the
Tuning knob
to view the software version.
6. Press the
Tuning knob
to back to last menu and press menu to return to
the normal radio display.
Note: USB socket inside battery compartment is for upgrading the software of the device
if needed.
SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the
On/Off button
to switch on the radio.
2. Press the
Menu button
,
3. Rotate the
Tuning knob
until the display shows “System”. Press the
Tuning knob
.
4. Rotate the
Tuning knob
until the display shows “Factory reset”. Press the
Tuning knob
.
5. Rotate the
Tuning knob
to select between “Yes” or “No”. Select “Yes” if you wish
to reset the radio, otherwise, select “No”.
6. Press the
Tuning knob
to cause the factory reset.
7. A full reset will be performed. All presets and the station list will be erased.
All settings will be set to the default values. The display will show “WELCOME
TO DIGITAL RADIO” for a few seconds, and then the radio will automatically
perform an auto scan of the Band III DAB channels and the FM band, the display
will show “Scanning” at DAB and “Auto” at FM.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect all batteries and the power supply.
BACKLIGHT
LCD backlight configuration
1. Press the
On/Off button
to turn on the radio.
2. Press the
Menu button
, and then rotate the
Tuning knob
until the display shows
“System”.
3. Press the
Tuning knob
; rotate the
Tuning knob
until the display shows “LCD
backlight”.
4. Press the
Tuning knob
to enter the LCD backlight adjustment menu.
5. Rotate the
Tuning knob
to select “on” in order to keep backlight always lightened
when the radio is turned on with AC power supply;
6. Or rotate the
Tuning knob
to select “off” (by default) so that the backlight will be
lightened for about 10 seconds whenever a button is pressed with AC power
supply.
7. Press the
Tuning knob
to confirm your choice.
Note: The LCD backlight option “on” is only functional when the radio is powered
by AC power supply. When the radio is powered by battery power supply, the
LCD backlight is switched to option “off” – 10 seconds lightened when a button is
pressed. When the radio is connected to mains AC power again, the last user
setting will be applied again.
17
18
GB
