30
SIDE
BURNER
Operation of the Burner
Press "S" Button and hold for 3 seconds to turn
ON/OFF the burner.
21
Adjusting the Flame
Press “HI” and “LO” Button (SIDE BURNER) to adjust
the flame. The Flame-Indication Lights will show the
level of the flame. One beep will sound every time the
flame is adjusted.
32
Turning ON the Burner
Once a burner is started, the flame will be maximized,
and all flame-indication lights will on. After 6 seconds,
the flame will be set to normal (Level 3), 3 Flame-
Indication Lights will on, and a beep will sound.
33
Turning OFF the Burner
Flame will be quenched, all Flame-Indication Lights will
off, and 3 beeps will sound.
34
Lighting of the Burner
If a burner can not be ignited in 20 seconds, the system
will closed the valve, 3 beeps will sound, and all the Flame
Indication Lights will flash. The burner need to
be turned off and reignite again if uses.
35
Flame Sensing of the Burner
Igniter will stop igniting if it senses flame.
36
Reigniting the Burner
If the flame is accidentally quenched, the burner will be
needed to turn off and reignite again.
37
REAR
BURNER
Operation of the Burner
Press "R" Button and hold for 3 seconds to turn
ON/OFF the burner.
38
Turning ON the Burner
The Flame-Indication Light will on, and one beep will
sound.
39
Turning OFF the Burner
The Flame-Indication Light will off, and 3 beeps will
sound.
40
Lighting of the Burner
If a burner can not be ignited in 20 seconds, the system
will closed the valve, 3 beeps will sound, and the
Flame-Indication Light will flash. The burner need to be
turned off and reignite again if uses.
41
Flame Sensing of the Burner
Igniter will stop igniting if it senses flame.
42
Reigniting the Burner
If the flame is accidentally quenched, the burner will be
needed to turn off and reignite again.
27