1.
Press the burner valves “OFF”.
2.
Turn the Liquid Propane cylinder valve counterclockwise to open the valve.
3.
Apply the soap solution to all gas fittings. Soap bubbles will appear where a leak is present.
4.
If a leak is present, immediately turn the gas supply “OFF” and tighten leaky fittings.
5.
Turn the gas back “ON” and recheck.
6.
Should the gas continue to leak from any of the fittings, turn the gas supply “OFF” and contact customer service at 1-
877-323-5263.
7.
If there is evident of excessive abrasion or wear, or the hose is cut, it must be replaced prior to the outdoor cooking
gas appliance being put into operation.
Only those parts recommended by the manufacturer should be used on the grill. Substitutions will void the
warranty.
WARNING
Cylinder must be stored outdoors out of the reach
of children and must not be stored in a building,
garage or any other enclosed area.
WARNING
Storage of an outdoor cooking gas appliance indoor is
permissible only if the cylinder is disconnected and
removed from the outdoor cooking gas appliance.
INSTALLER FINAL CHECK
•Maintain specified clearance of 24 inches from combustible materials and construction.
•All internal packaging has been removed.
•The hose and regulator are properly connected to the Liquid Propane cylinder.
•The unit has been tested and is free of leaks.
•The gas supply shut off valve has been located.
•All burners are installed.
•Keep the instruction manual for future reference
WARNING
1. Do not store spare Liquid Propane cylinders under or near this appliance.
2. Never fill the cylinder beyond 80 percent capacity.
3. If the information above is not followed exactly, a fire causing death or serious injury may occur.
WARNING
The grill and its individual shutoff valve must be disconnected from the gas supply piping system during any
pressure testing of that system at test pressure in excess of 1/2" psi.(3.5kpa).
The grill must be isolated from the gas supply piping system by closing its individual; manual shutoff valve during
any pressure testing of the gas supply piping supply at test pressure equal to or less 1/2" psi.(3.5kpa).
TO TEST
12