10
11
INSTALLATION INSTRUCTIONS
(Continued)
MOUNTING BRACKET DIAGRAMS AND DIMENSIONS
(Recommended)
For 738 Series Model, WIDTH: 20.6in/522mm
For 808 Series Model, WIDTH: 23.3in/592mm
7.9in/200mm or more to ceiling
Indoor unit outline
Pipe hole
2in/50mm
or more to wall
2in/50mm
or more to wall
• Decide an installing location for the mounting
plate according to the indoor unit location and
piping direction.
NOTE:
It is recommended to install screw
anchors for sheet rock, concrete block, brick
and such type of wall.
• Keep the mounting plate horizontal with a
horizontal level or dropping line.
• Mark the center of the indoor unit on mounting
plate for future reference.
NOTE:
The center of the mounting bracket
may not be the center of the indoor unit.
• Install mounting plate to the wall with a
minimum of six screws, evenly spaced to
properly support indoor unit weight.
NOTE:
The shape of your mounting plate
may be different from the one above, but the
installation method is similar.
NOTE:
As the above figure shown, the six
holes matched with tapping screw on the
mounting plate must be used to fix the
mounting plate, the others are prepared.
MOUNTING PLATE INSTRUCTIONS ON WOODEN WALL
INSTALLATION INSTRUCTIONS
(Continued)
MOUNTING BRACKET DIAGRAMS AND DIMENSIONS ON WOODEN WALL
(Recommended)
For 738 Series Model, WIDTH: 20.6in/522mm
For 808 Series Model, WIDTH: 23.3in/592mm
7.9in/200mm or more to ceiling
Indoor unit outline
Pipe hole
2in/50mm
or more to wall
2in/50mm
or more to wall
For 908/1080 Series Model, WIDTH: 24.8in/629mm
7.9in/200mm or more to ceiling
Indoor unit outline
Pipe hole
2in/50mm
or more to wall
2in/50mm
or more to wall
For 30k-36k Models, WIDTH: 32.3in/820mm
7.9in/200mm or more to ceiling
Indoor unit outline
Pipe hole
2in/50mm
or more to wall
2in/50mm
or more to wall
