OPERATING INSTRUCTIONS
• Check that the pump drain hose does not link
or back.
• Empty the water of the bucket.
• Reinstall the pump hose if it drops and reinstall
the bucket properly. Turn on the unit. If the error
repeats, call for service.
• Water can be automatically emptied into a fl oor
drain or a suitable drainage facility by attaching
the pump drain outlet with a pump drain hose
(included).
• Remove the continuous drain hose from the unit
and install the plastic cover to the continuous
drain hose outlet of the unit by clockwise rotation.
• Reinsert the pump drain hose into the pump drain
hose outlet for depth of 15mm at least, then lead
the water hose to the fl oor drain or a suitable
drainage facility.
3. Pump Draining (on some models)
• Press the pump pad of the unit to activate the
pump operation. When the bucket is full, the pump
starts to work.
• Make sure the hose is secure so there are
no leaks.
• Direct the hose toward the drain, making sure that
there are no kinks that will stop the water fl owing.
• Place the end of the hose into the drain and make
sure the end of the hose is level or down to let the
water fl ow smoothly.
• Select the desired humidity setting and fan speed
on the unit for pump draining to start.
Please turn off the unit and disconnect the power
cord out. Check the following things:
• Cleaning the fi lter of the pump.
• Remove the bucket from the unit, take down the
pump and clean the fi lter of the pump.
Note
Note
The pump may cause a loud noise when it
starts to work for 3~5 minutes. It is a normal
phenomenon.
Do not use this operation when the outdoor
temperature is equal to or less than 32 °F,
otherwise water is become ice that will cause the
water hose blocked up and the unit failure.
Make sure to empty the bucket once a week
when using the pump draining feature. When the
pump draining feature is not being used, remove
the pump drain hose from the outlet. Press the
pump drain hose outlet in and take the pump
drain hose out from it. Make sure do not let the
water in the pump hose drip to the fl oor.
Note
The pump operation “on” light blinks at 1Hz
when the pump is having an operational failure.
Reinstall the
plastic cover
Pump drain hose
Pump drain hose outlet
Filter of the pump
1. Press the pump drain hose outet in
2. Take the pump drain hose out
2
1
CONTINUED
20
