18
OPERATING INSTRUCTIONS
There are three ways to remove collected water.
1. Pull out the bucket a little.
2. Hold both sides of the bucket with even
strength and pull it out from the unit.
3. Pour the water out.
Removing The Collected Water
• When the unit is off , if the bucket is full, the Full
indicator light will illuminate.
• When the unit is on, if the bucket is full, the
compressor and the fan turn off , and the Full
indicator light will illuminate, the digital display will
show P2.
• Slowly pull out the bucket. Grip the left and right
handles securely, and carefully pull it out straight,
so water does not spill. Do not put the bucket
on the fl oor because the bottom of the bucket is
uneven. Otherwise the bucket will tip over and
cause the water to spill.
• Throw away the water and replace the bucket.
The bucket must be in right place and securely
installed for the dehumidifi er to operate.
• The machine will re-start when the bucket is
restored in its correct position.
1. Use the Bucket
Note
•
When you remove the bucket, do not touch any parts
inside the unit. Doing so may damage the product.
•
Be sure to push the bucket gently all the way into the
unit. Banging the bucket against anything or failing to
push it in securely may cause the unit not to operate.
•
If the pump hose drops when you remove the bucket,
you must reinstall the pump hose properly to the unit,
before placing the bucket into the unit.
•
When the unit is on, if the bucket is removed, the
compressor and the fan turn off , then the unit will beep
8 times and the digital display shows Eb.
•
When the unit is off , if the bucket is removed, the unit
will beep 8 times and the digital display shows Eb.
Pump hose drops
Reinstall pump hose properly
CONTINUED
