PSD01801
PEREL
2
•
When using an extension cord, make sure the wires are at least 1mm². Do not use extension cords on a reel.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
•
Always make sure you are in a stable position while using the
PSD01801
.
•
Make sure you can never touch water, electricity or gas lines while working.
•
Do not use the
PSD01801
in the vicinity of flammable vapours and substances.
•
Vibrations can damage the arm-hand system. Keep exposure to vibrations as short as possible.
3. Specific Safety Instructions
•
Use a vacuum cleaner to collect the dust.
4. Description
(fig. A)
1. Dust exhaust
2. ON/OFF-switch
3. Sanding pad
4. Sanding paper
5. Operating Instructions
IMPORTANT
: Sanding requires a low pressure from your side. Too much pressure will place unnecessary load on
the motor. Check the sanding paper regularly. Replace used sanding paper.