EWL37
V. 01 – 05/08/2016
4
©Velleman nv
4.
Charging
Warning:
Do not puncture batteries or throw them in fire as they
may explode. Do not attempt to recharge non-rechargeable
batteries (alkaline). Dispose of batteries in accordance with local
regulations. Keep batteries away from children.
Charge prior to initial use or when performance has reduced. To do so:
1.
Make sure the device is switched off.
2.
Connect the USB connector to the back of the device.
3.
Insert the adapter into the mains.
4.
The red LED will light up to indicate charging has started. It will turn
green when the battery is fully charged.
5.
Remove the adapter from the mains and disconnect from the adapter.
Notes
A new battery’s best performance is achieved only after two or three
complete charges.
Failure to recharge every three months may permanently damage or reduce
the performance.
Never insert foreign metallic objects into the charging socket.
Never attempt to use an adapter other than the one provided with the
device.
Never leave the device in extremely high temperatures when charging.
Extreme overcharge or over discharge may affect the battery’s lifecycle.
5.
Cleaning and Maintenance
Storage
Store in a clean and dry area.
If stored in a vehicle for use in roadside emergencies, please ensure
that it is properly secured and in a safe place inside the vehicle.
Cleaning
Occasionally wipe with a damp cloth to keep it looking new. Do not use
harsh chemicals, cleaning solvents or strong detergents.
Do not immerse or submerge in water, ammonia or any other liquid.
6.
Technical Specifications
power LED module
front ..................................... super-bright white 3 W COB
top .................................................................... 7 LEDs
battery .............................................. Li-on 3.7 V, 2200 mAh
charger
input ............................................... 230 V~, 50 Hz, 6 W
output ................................................... 5 VDC, 500 mA
