![background image](http://html.mh-extra.com/html/perel/evm1400/evm1400_user-manual_1528647005.webp)
EVM1400_v2
PEREL
5
•
AC Voltage
1.
Connect the black test lead to the COM jack and the red test lead to the V jack.
2.
Set the rotary selector at the desired V range.
3.
Press
FUNC.
to select the AC range.
4.
Connect the test leads with the source or the load under measurement.
5.
Read the displayed value.
6.
The meter indicates an overrange when
OL
is displayed. Select a higher range. Select the highest range when
the value to be measured is unknown.
•
DC Current
1.
Connect the black test lead to the COM jack and the red test lead to the mA jack for currents of max. 400mA. For
a max. of 10A, connect the red test lead to the 10A jack.
2.
Set the rotary selector at the desired A range.
3.
Press
FUNC.
to select the DC range.
4.
Connect the test leads in series with the load under measurement.
5.
Read the displayed value.
6.
The meter indicates an overrange when
OL
is displayed. Select a higher range. Select the highest range when
the value to be measured is unknown.
•
AC Current
1.
Connect the black test lead to the COM jack and the red test lead to the mA jack for currents of max. 400mA. For
a max. of 10A, connect the red test lead to the 10A jack.
2.
Set the rotary selector at the desired A range.
3.
Press
FUNC.
to select the AC range.
4.
Connect the test leads in series with the load under measurement.
5.
Read the displayed value.
6.
The meter indicates an overrange when
OL
is displayed. Select a higher range. Select the highest range when
the value to be measured is unknown.
•
Resistance Measurement
1.
Connect the black test lead to the COM jack and the red test lead to the
Ω
jack.
2.
Set the rotary selector at the desired
Ω
range.
3.
Press
FUNC.
to select the
Ω
range.
4.
Connect the test leads with the resistance.
Note:
•
For resistance > 1M
Ω
, the meter may take a few seconds before stabilizing the reading.
•
When the input is not connected, overrange will be displayed as 1.
•
The meter indicates an overrange when
OL
is displayed. Select a higher range.
To avoid electrical shock and/or damage to the instrument, do not apply more 600VAC RMS.
To avoid electrical shock and/or damage to the instrument, never measure a live circuit.
To avoid electrical shock and/or damage to the instrument, never measure a live circuit.
To avoid electrical shock and/or damage to the instrument, disconnect the circuit power and
discharge all high-voltage capacitors before measuring resistance.
Summary of Contents for EVM1400
Page 2: ......