EPATH2
PEREL
4
4. Description
1.
heating element
2.
knob
3.
body
4.
position indication
5.
pull chain
6.
cover
7.
upper post
8.
M5x6 screws
9.
middle post
10.
M5x6 screws
11.
lower post
12.
clamp
13.
power cord
14.
base cover
15.
M6x30 screws
16.
base
5. Assembly
•
Before installing the heater, make sure the mains socket is fitted with a 30mA circuit breaker.
a.
Insert the lower post (11) into the base (16). Fix using 4 x M6x30 screws (15). Slide the clamp (12) over the
lower post (11).
b.
Join the middle post (9) and the lower post (11) and fix using 4 x M5x6 screws (10).
c.
Join the upper post (7) and the middle post (9) and fix using 4 x M5x6 screws (8).
d.
Place the heating element (1) onto the upper post (7) and fix tightly with the knob (2). Lead the power cord
(13) through the clamp (12).
e.
Adjust the angle (0° ~ 45°) of the heating element.
6. Use
•
Switch the heater on or off through the pull chain switch. Note that there is a slight vibration when switching on the
heater. This vibration will disappear after a few seconds.
•
Positions:
o
Position 0: STOP
o
Position 1: 650W
o
Position 2: 1350W
o
Position 3: 2000W
7. Cleaning and Maintenance
•
Your
EPATH2
does not require any particular maintenance. You may wipe regularly the device with a moist, lint-
free cloth. Do not use alcohol or solvents.
•
Contact your dealer in the event of malfunction.
For more info concerning this product, please visit our website www.perel.be.
The information in this manual is subject to change without prior notice.
Summary of Contents for EPATH1
Page 2: ...EPATH2 PEREL 2 ...
