![background image](http://html1.mh-extra.com/html/perel/edb5/edb5_user-manual_1528548004.webp)
EDB5
V. 02 – 12/11/2013
4
©Velleman nv
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
status LED
4
CODE button
2
speaker
5
melody select button (SEL)
3
belt/clip mounting hole
6
battery compartment
A
screw (behind name tag)
C
push button
B
status LED
D
mounting holes
6.
Operation
1.
Make sure batteries are present inside the doorbell and doorbell
pushbutton (see §8).
2.
Mount the doorbell pushbutton in a location where it is protected
from harsh weather conditions (IP44).
3.
Press and hold the CODE button
[4]
for ± 3 seconds until status
LED
[1]
flashes. Within 15 seconds, press the doorbell push
button
[C]
to set the transmitting code.
4.
Mount the doorbell itself in a dry indoor location. It can also be
carried around when desired.
Note:
normal range without obstructions is ± 40 m. Walls, metal
frames and some appliances (e.g. working microwave ovens,
radios…) will reduce this range.
5.
Press the melody select button
[5]
to select the desired melody
(4 options).
7.
Troubleshooting
When sound becomes weak, replace the batteries of the doorbell
(see §8).
When pushing a push button does not produce a chime:
o
verify whether the push button is located within the specified
range (max. 40 m). If not, bring it closer to the doorbell.
o
verify whether doorbell and doorbell push button are not
surrounded by metal or near a strong magnetic field. In these
cases, move the push button or doorbell to a suitable location.
o
replace the push button battery (see §8).
8.
Batteries
Doorbell
1.
Open the battery compartment
[6]
.
2.
Insert 2 new 1.5 V batteries type AA (LR6C) with polarity as
indicated inside the battery casing.
3.
Close the battery compartment.