![background image](http://html1.mh-extra.com/html/perel/ac38/ac38_user-manual_1528351004.webp)
AC38
V. 01 – 07/06/2017
4
©Velleman nv
Make sure that the positive terminal connecting cable has no contact with a fuel line.
Make sure that no explosive and flammable substances, e.g. petrol or solvents, can be ignited during
charging.
Ensure that there is adequate ventilation during charging.
WARNING
RISK OF CHEMICAL BURNS
Wear safety goggles and protective gloves. If battery acid comes into contact with your eyes or skin,
rinse with plenty of clear running water and seek immediate medical assistance.
Avoid an electric short-circuit when connecting the charger to the battery. Connect the negative
terminal connecting cable only to the negative terminal of the battery or to the coachwork. Connect
the positive terminal connecting cable only to the positive terminal of the battery.
Do not set up the charger near fire or subject it to temperatures exceeding 50 °C.
When connecting the charger, be sure not to damage any lines for fuel, electricity, braking system,
hydraulics or water with screws.
Do not cover the charger with objects of any kind.
Protect the electrical contacts of the battery against short-circuiting.
Use the charger exclusively for charging or trickle charging undamaged 6 V/12 V lead batteries.
Frozen batteries may not be charged.
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, crash, etc. Using the device in an unauthorized way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
Keep this manual for future reference.
4.
Overview
Refer to the illustrations on page 2 of this manual.
1
standby mode
4
mode button
2
error indication
5
battery type
3
battery charging level