Perel 3700-9, User Manual

Page: 3 / 9

3700-9 PEREL 3
3700-9 – HEAT GUN SET 1000W ~ 2000W (9 pcs)
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the hot-air gun! This device is the perfect tool for stripping paint, varnish and glues, shaping and
welding of soft materials, fast drying… Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
•
Do not point the nozzle towards persons or animals.
•
Only use the device for its intended purpose.
•
Wear protective gloves to avoid burns when using this device; the nozzle heats up.
•
Always keep the device clean. Disconnect the device from the mains prior to maintenance activities. Wipe the
device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
•
Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
•
Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
•
Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
•
There may be some smoke or a particular smell when using this device. This is normal.
•
Use the original packaging if the device is to be transported.
•
Note that damage caused by user modifications to the device is not covered by the warranty.
•
Keep the device away from children and unauthorised users.
•
Contact your dealer for spare parts if necessary.
3. Technical Specifications
Power Supply max. 230VAC / 50Hz
Settings
1000W (Position I) 300°C at 500l/min
2000W (Position II) 600°C at 650l/min
For more info concerning this product, please visit our website www.perel.eu
The information in this manual is subject to change without prior notice.
Do not touch the nozzle during operation!
Keep this device away from rain and moisture.