Configuring the Falcon RF
< 18 > Falcon RF WaveLAN Supplement
11. If you want to make changes to the
CONFIG
.
SYS
file, select the
CONFIG.SYS
button.
NOTE:
Certain default configuration parameters and card and
socket services drivers will automatically be included at the be-
ginning of the
CONFIG
.
SYS
file before it is downloaded to the
Falcon.
12. Select the
Done
button in the File Configuration window to
return to the Custom Configuration menu.
13. Modify your program settings and communications settings, if
necessary.
14. Select the
Download
button in the Custom Configuration menu
to install the IPX/SPX protocol stack on the Falcon.
15. Reboot the Falcon when the download is completed.
ODI with Custom
Installations
This section covers the fundamental theory behind the various con-
figuration files used to configure a generic ODI implementation on
the Falcon. The sample files can be used as a starting point for any
implementation that relies on ODI.
AUTOEXEC.BAT
The following is a sample
AUTOEXEC
.
BAT
file that
could be used for NetWare Client:
@echo off
REM ****************************************************************
REM *** THE FOLLOWING LINES SET UP DEFAULT PARAMETERS FOR SOME
REM *** ENVIRONMENT VARIABLES. THESE LINES MAY BE MODIFIED OR
REM *** OEVERRIDDEN IN THE USER SECTION BELOW.
REM ****************************************************************
SET PROMPT=$P$G
SET DIRCMD=/OGN /P
REM ****************************************************************
REM *** THE FOLLOWING SECTION IS FOR CUSTOMIZED USER ENTRIES.
REM *** INSERT USER-SPECIFIC OPTIONS AND COMMANDS HERE.
REM *** LOAD THE LINK SUPPORT LAYER, THE LUCENT WAVELAN ODI
REM *** DRIVERS, AND THE IPX/SPX PROTOCOL STACK.
REM ****************************************************************
C:\NET\LSL.COM
C:\NET\WVLAN43.COM
C:\NET\IPXODI.COM
REM ****************************************************************
REM *** THE FOLLOWING LINES ADD SYSTEM COMPONENTS TO THE PATH AND
REM *** RUN THE MAIN APPLICATION EXECUTABLE, IF ONE WAS SPECIFIED.
REM ****************************************************************
IF EXIST C:\BPARAMS.INI COPY C:\BPARAMS.INI PARAMS
SET PATH=C:\;C:\NET;C:\DOS;%PATH%
C:
CD\NET
VLM /V4
F:
LOGIN SUPERVISOR