Installation and Operation Manual
10
8 INSTALLATION
Attention!
The manufacturer will not accept liability for any damage to the gate
or other equipment, or otherwise loss caused as a result of improper installation,
and will dismiss any claims by the customer should the installation work be carried
out not in accordance with this Manual.
8.1 General recommendations
Proper installation is critical to performance and serviceability of the gate. We strongly
advise to study this section before installation work is commenced, and follow the
instructions to the letter over the course of the installation.
Installation to be carried out by at least two persons qualified in assembly and electric
work.
We advise:
mounting the gate on flat, solid concrete floors (grade 400 or higher, SCS B22.5),
stone or similar foundations at least 150 mm thick;
employing reinforcing elements 250×250×400
mm for soft grounds;
using relevant mounting hardware for installation on different foundations;
making sure the mounting foundation is horizontal and flat; the flatness deviation
must not exceed 1.5 mm;
installing optional equipment in the sequence given in sect. 8.3.
8.2 Installation tools
1.2÷1.5 kW hammer drill;
Ø16 mm hard-alloyed drill bits;
Horn-type and socket wrenches: S17, S13;
Allen keys SW4, SW6;
№2 cross-tip screwdriver, 150 mm;
№5 straight- slot screwdriver, 150 mm;
2 m tape-measure;
level gauge;
two stepladders (4 steps or more).
Note:
Use of other similar tools is allowed providing they do not reduce quality of the
installation work.
8.3 Installation of standard and optional equipment
Carry the installation work in accordance with respective manuals and below guidelines.
Exact installation sequence depends on the chosen entrance point layout.
For installation of the gate together with the
MB-16
full height railings, we recommend the
following installation sequence:
1. the gate;
2. standard sections of the full height railing;
3. extension sections of the full height railing.
Summary of Contents for WHD-16
