background image

Operation manual 

Turnstile housing cover key  ......................................................................................................  2 

Mechanical release key  ............................................................................................................  2 

RC panel  ..................................................................................................................................  1 

Installation tools:

 

Self-adhesive wires retainer  .....................................................................................................  2 

Nylon cable tie 100 mm  ............................................................................................................  2 

Operational documentation: 

Certificate  .................................................................................................................................  1 

Operation manual  .....................................................................................................................  1 

4.2  Optional equipment supplied on request  

SORMAT PFG IR M10-15 anchor bolts  ........................................................................................  4 

Passive infrared sensor of intrusion detector  .................................................................................  1 

Siren (for alerts on unauthorized entry attempts) ...........................................................................  1 

WRC kit

  ........................................................................................................................................  

 

Note: 

WRC kit consists of a receiver and 2 transmitters (tags) with operation range up to 40 m. 

 

Fig. 1.  TTD-03.2 box tripod turnstile. Overall dimensions 

5  PRODUCT DESCRIPTION 

5.1  Main features 

  The turnstile can be operated both autonomously with the RC panel or WRC and with an ACS. 

  The turnstile housing is supplied with the safe voltage – not more than 14 V (in case of the 

remote indicators application – not more than 42 V). 

  The turnstile has low power consumption – not more than 8.5 W. 

  At the power supply switching off the turnstile remains in the set position in both directions 

(closed, if the particular direction was closed at the moment of the power switching off, or 

open, if it was open at the moment of the power switching off). 

  The turnstile ensures automatic reset of barrier arms to home position after each passage. 

  The smoothness of the turnstile operation is ensured by a damper. 

Summary of Contents for TTD-03.2



























Reviews: