PERCo IP-Stile KT-05.4, Assembly And Operation Manual

Page: 11 / 14

User Guide
10
7 ACM, CONTROLLER EVENTS AND STATES INDICATION
IP-Stile controller indication is displayed on the indication blocks.
Note:
•
When reading the proximity card identifier in any ACM, the audio signal of
0.5 sec. is sent, the yellow light indicator changes its status for 0.5 sec. Other
identifiers don’t change their status.
•
If the access with the proximity card is granted, the light indication is turned to
Holding in unlocked state time , or until the moment of the next passage. If
the access is banned, the indication is turned on for 2 seconds.
Possible indication variants are stated in Table. 2.
Table 2. Controller indication
Card presentation ACM
Indicators
Green Yellow Red
Sound
(sec.)
No configuration No 2 Hz 2 Hz 2 Hz off
No
«Open» on off off off
«Control» off on off off
«Security» off 1 Hz 1Hz off
«Closed» off off on off
Access denied
«Open» on off off 0,5
«Control»
off off on 1 «Security»
Any card «Closed»
Access granted
«Open»
on off off 0,5
«Control»
«Security» off off on 1
Access granted, arming/ disarming
authorization
«Open»
on off off 0,5 «Control»
«Security»
2
Repeated card
presentation with
arming/disarming
authorization
Arming (turn to
«Security» ACM)
«Security» off 1 Hz 1Hz 0,5
Non-arming
3
(up
to the return to
initial ACM)
«Open»
off off 1sec 1
«Control»
Waiting for verification/ double-check
access
Any off 2Hz off 0,5
2
Presenting the card with disarming authorization in the «Security» ACM, the following
operations happen: protected zone disarming and OD unlocking for the Holding in unlocked
state time . After this period of time OD turns to the ACM, set before the protected zone arming
( «Open» or «Control») .
3
Light and audio indication turns on for 1 sec.