FP-01C
Front panel for ST-01 Speed gate
15
5.4.3 CT/L04.2, CT03.2 configuration in Web-interface for working with the card
capture reader
Attention!
By using Web-
interface it’s possible to set only the simplest visitor’s card withdrawal
algorithm, to amplify the setting range, use
PERCo-Web
software. The
CT/L04
(
CT03
)
controllers are not compatible with configuration via Web-interface.
1. In
"Configuration"
→
"Edit"
→
"Operating devices"
section, select the OD that is physically
connected to the card capture reader, then select
"Reader 1"
or
"Reader 2"
depending on the
direction of the passage that is controlled by the card capture reader. Set the following
parameters for the reader:
•
set
the
"External verification device"
value for the
"Verification"
parameter,
•
within the
"External device verification in ACM "Control"
group of parameters
set
"Yes"
value
for the
"Visitor pass verification"
parameter
and
also set the required values
for
"Visitor verification activation"
and
"External device verification waiting period"
parameters.
2. Set the following parameters in
"Configuration"
→
"Edit"
→
"Physical contacts"
section:
•
set the following parameter values for input that is physically connected to the
“Card
captured”
output of the card capture reader:
-
"Normal state:"
– "Cut"
,
-
"Function:"
– "External verification device confirmation input"
,
-
"Operating device:"
– "1"
(number of OD that is physically connected to the card
capture reader),
-
"Direction:"
– "1" or "2"
(depending on the passage direction that is controlled by the
card capture reader):
•
Set the following parameter values for the output that is physically connected to the
“Capture card” input of the card capture reader:
-
"Normal state:"
– "Not energized"
,
-
"Function:"
– "Output"
:
Summary of Contents for FP-01C
Page 21: ......
