Peraqua iQntrol DOS-ECO, Instruction And User'S Manual, Page: 7 / 36

Instructions and user manual DOS-ECO
NOT041ENV01_FP1
7
2 DOS-ECO DESCRIPTION
The DOS-ECO is characterized by its ability to measure the pH (0 to 14 pH) with its probe placed in the filtration
circuit which analyzes the water of your pool.
Depending on the measured value, the DUO will inject the amount of product needed to maintain the water balance
of the pool thanks to its dosing pump.
The DUO operates as dosing acid (pH-) or basic (pH+) depending on its configuration.
2.1 Parts description
The complete list of accessories delivered with the equipment is given below. All the parts will be necessary for the
correct operation of your unit.
A1 : pH4 / pH7 calibration solutions (kit pH)
A2 : 475mV calibration solution (kit redox)
B : Probe holder (x2)
C : Guide collar (x2)
D : Clip (x2)
E : Foot strainer
F : Drill bit
G : Probe’s o-ring (x4)
H : Probe holder’s o-ring (x2)
I : 4x6 PVC tube (4m) (x2)
J
1 : pH probe
J 2 : redox probe
K : Probe holder’s screw (x8)
L : Probe holder’s nut (x8)
M : Wall mounting screw (x2)
N : Wall mounting plug (x2)
O : Spacers for Ø63 pipe (x8)
P : Spacer for long
probe 120mm (x2)
Q : Water direction flux arrow
Optionnal : Sucction lance