Instructions and user manual DOS-ECO
NOT041ENV01_FP1
10
3.2
Hydraulic and electrical installation principle
Description des repères
A-
DOS-ECO connected to a permanent power supply and filtration detection
B-H
2 in 1 probe holder :
B-
pH probe holder: supports the pH probe and the injection valve
H-
Probe holder for Rx: supports the redox probe and the injection valve
C-
Chemicals tanks
D-
Electrical control box for the control of the swimming pool circulation pump
E-
Pool water circulation pump
F-
Pool
G-
Pool filtration
i-
Electrical cable for wire detection connected in electrical box D
Warning :
-Under no circumstances will "i" be connected in parallel to the power supply terminals of the filter pump "E" in
the electrical box "D".
- The 2 in 1 probe holder "B" or "H" can have a maximum inclination of +/- 45° with respect to the vertical axis.
-For an optimal lifetime of your peristaltic tube, it is preferable not to exceed a pressure of 1 bar and in no case
exceed a pressure of 1.5 bar.
-The pH probe must be located before (upstream) the redox probe