Gebrauchsanleitung iQntrol SALT MODBUS REV.1
57 / 93
3.2.2- AUTO kit
The AUTO kit (pH measure and regulation) can be added to any
IQNTROL SALT
MODBUS
series. The following pictures show the parts of the kit and installation
diagram.
3.2.2.1- Parts
1-
IQNTROL SALT MODBUS
Equipment
2- Suction Tube (flexible)
3- Injection Tube (rigid)
4- Suction filter (place vertically on the bottom of the acid container)
5- pH Probe
6- Probe Holder
7- Flange
(kit does not provide it)
8- Injector (place with the arrow facing downwards)
9- Pipe nipple 3/8,1/2
10- Flange
(kit does not provide it)
11- Acid inlet (suction tube)
12- Acid outlet (injection tube)
13- pH probe connector (BNC)
14- pH4 calibration liquid
15- pH7 calibration liquid
16- Rubber cap for calibration