Functions
2
0
2
2
-0
2
21
Operating Limits and Recommendations
The operating limits are automatically enforced by the system. The operating recommenda-
tions indicate the limits of the system as tested by the manufacturer. If the system is used out-
side of these limits, performance can be affected and manufacturer support is not always
guaranteed.
Note
Recording Fault
A recording fault is indicated by the blue LED flashing several times after a trigger has
occurred.
Possible reasons for this include:
•
Memory card is full
•
Memory card is missing
•
Memory card is faulty
Note
Recording with a Resolution of 1920 x 1080 Pixels
Live view, recording, and RTSP share the limited computing power of the camera. Recording
with a resolution of 1920 x 1080 pixels requires the most computing power and can result in the
live view having a very low frame rate. To reduce the impact on the live view or in case of other
performance problems, we recommend disabling the RTSP stream when recording with a
resolution of 1920 x 1080 pixels.
When using 1920 x 1080, only one recording can run at a time.
When using a recording resolution of 1920 x 1080 pixels, the field of view is reduced due to
sensor limitations. This applies to all streams, although only the recording function supports
1920 x 1080.
Feature
Type
Value
MicroSD memory capacity
Recommendation
8 GB
Count of recordings
Recommendation
10,000
Minimum time interval between recordings
Limit value
2 s
Simultaneous recordings
Limit value
3
Simultaneous HTTP connections
Limit value
8
Simultaneous MJPEG streams
Recommendation
2
Simultaneous RTSP streams
Recommendation
1
