1
8
2
3
1
4
2
0
2
0
-0
9
10
Product Description
Indications
3.3
Interface Properties
AS-Interface
The KE1 series module is connected to the AS-Interface via removable terminals. The cable
must satisfy the minimum requirements for AS-Interface, e.g., AS-Interface ribbon cable VAZ-
FK-S-YE.
Inputs
General
The switches are connected to removable terminals. One or more mechanical switches can be
connected in series per channel.
Figure 3.1
Two mechanical switches (or one dual-channel switch)
If only one single-channel switch is to be used, input 1 should be used in this case. If input 2 is
not connected, it must be bridged.
Figure 3.2
One mechanical switch
Designation
Description
FAULT
Fault indication: red LED
Red: communication error or address is 0
PWR
AS-Interface voltage: green LED
S1
Switching status of input channel 1: yellow LED
S2
Switching status of input channel 2: yellow LED
