43
Radar Motion Sensor RMS-FRW
Set-up
6
Set-up
When switching on the RMS-FRW, make sure to remove all objects in the door area that do not belong in the usual
vicinity of the door.
You can also program the sensor using the remote control with the hood placed in position.
In such a case, the sensor address needs to have been previously set.
7
Operation
7.1
Keypad menu operation
7.1.1 General setting instructions
In the keypad menu the sensor can be set by means of the navigation key and the bar graph display.
The sensor function is maintained even in the keypad menu. The programming can be checked imme-
diately.
Set-up
To set-up the sensor, proceed as follows:
1.
Switch on the power supply.
2.
Set the output movement detector on the RMS-FRW or select the standard profile door
control. (see section 10.1)
3.
Set the sensor address.
4.
Set the mounting height on the RMS-FRW.
5.
Set the movement detection on the RMS-FRW.
6.
Check the settings by pacing through the dynamic field.
UP
SELECT
DOWN
