50
Radar Motion Sensor RMS-FRW
Appendix
10
Appendix
10.1 Explanation of sensor parameters
10.1.1Movement detection
Sensitivity
Using this sensitivity setting, the size of the sensing area can be changed.
The setting options range from 1 (smallest sensing area) to 10 (largest sensing area).
This setting can be set using the remote control or the keypad menu.
Detection mode
The direction recognition can be changed with the detection mode.
This setting can be set using the remote control or the keypad menu.
Suppression of cross traffic
This mode can be used to change the strength of cross traffic suppression. The setting options range from 1 (off),
2 - 5 (low) to 6 - 10 (high). High cross traffic suppression means strong suppression (fade out) of cross traffic.
This setting can be set using the remote control or the keypad menu.
Immunity
In principle, the sensor is immune against any interfering influences. However, special installation situations or major
sources of interference may sometimes cause incorrect triggering. The immunity setting can be used to minimize
various interfering influences (vibrations, reflections, fluorescence lighting etc.).
The setting options range from 1 (off), 2 - 5 (low) to 6 - 10 (high).
This setting can be set using the remote control or the keypad menu.
Setting
Description
Mono
Detects forward and backward movement
Forward
Detects movement towards the sensor
Backward
Detects movement away from the sensor