Power Supply PS1000-A6-24.20
Accessories
20
21
-1
1
35
25
Accessories
PS1000-D2-24.40.RM – Redundancy Module
The device is a dual redundancy module, which can be used
to build 1+1 or N+1 redundant systems.
The device is equipped with two 20A nominal input
channels, which are individually decoupled by utilizing
MOSFET technology. The output can be loaded with
a nominal 40A continuous current.
Using MOSFETSs instead of diodes reduces heat
generation, losses and voltage drop between input
and output. Due to these advantages, the unit is very narrow
and only requires 36mm width on the DIN rail.
The device does not require an additional auxiliary voltage
and is self-powered even in case of a short circuit across
the output. It requires suitable power supplies on the input,
where the sum of the continuous short circuit current stays
below 26A. This is typically achieved when the power
supplies are featured with an intermittent overload behavior
(
Hiccup
mode).
See chapter 26.5 for wiring information.
