Power Supply PS1000-A6-24.20
Terminals and Wiring
20
21
-1
1
23
14
Terminals and Wiring
The terminals are IP20 finger safe constructed and suitable for field- and factory wiring.
Daisy chaining
Daisy chaining (jumping from one power supply output to the next) is not allowed.
Use a separate distribution terminal block as shown in Figure 14.1.
Figure 14.1 Using distribution terminals
Input
Output
DC-OK-Signal
Type
Screw terminals
Screw terminals
Push-in terminals
Solid wire
Max. 6mm
2
Max. 6mm
2
Max. 1.5mm
2
Stranded wire
Max. 4mm
2
Max. 4mm
2
Max. 1.5mm
2
American Wire Gauge
AWG 20-10
AWG 20-10
AWG 24-16
Max. wire diameter (including
ferrules)
2.8mm
2.8mm
1.6mm
Recommended tightening torque
Max. 1Nm, 9lb-in
Max. 1Nm, 9lb-in
–
Wire stripping length
7mm / 0.28inch
7mm / 0.28inch
7mm / 0.28inch
Screwdriver
3.5mm slotted or
cross-head No 2
3.5mm slotted or
cross-head No 2
3mm slotted to open
the spring
