Pepperl+Fuchs ODT-MAC40-RD Series, Manual, Page: 36 / 37

2
012-
10
36
ODT-MAC40*-*-RD
Appendix
Command F
E C F H Set flash color (if supported)
Value Effect
0 No illumination
1 Red illumination
2 Green illumination
3 Red and green illumination
E X H Stop with read error
Value Effect
0 Stop with read error switched off
1 Stop with read error switched on
F 0 H Control laser pointer
Value Effect
0 Laser pointer off
1 Laser pointer 1 off, laser pointer 2 on
2 Laser pointer 1 on, laser pointer 2 off
3 Laser pointer on
Command
Description C
D
2
D
1
D
0
Command
Description C
D
2
D
1
D
0
F X X X Exit decoder and change baud rate. It is then imperative that the following
sequence is observed:
Alternative: Command C7xx fulfills exactly the same function and is easier to
set up!
Sequence:
1.) bd<SPACE>HH<CR> HH take from baud rate table
2.) Change the baud rate accordingly at the terminal.
3.) autoexec<CR>
This string returns you to the decoder.
Baud rate table HH Baud rate
7F 9600
3F 19,200
29 2880
1F 38,400
14 57,600
0C 115,200