Pepperl+Fuchs NVD-111 Manual Download Page 38

Page: 38 / 41

6859

201

36 - EN

Warning Device NVD-111

Troubleshooting

6.2

Sensor Maintenance

Cleaning the Sensor

The sensor is maintenance free. To ensure the entire alarm system functions

correctly, clean the sensor at the following intervals:
1. Clean the sensor at least once a year.
2. Pay particular attention to cleaning the sensor tips of all oil, grease, and other

dirt residues using a grease-dissolving cleaning agent.

3. If the sensor is used in difficult conditions, clean the sensor more often.

Caution!

Malfunction or false alarm caused by a contaminated sensor
If the sensor is very dirty, this may trigger a false alarm or mean that no alarm is

triggered under certain circumstances.

Clean and dry the sensor when emptying/disposing of the oil/petrol

separator or container.

Do not clean the sensor with corrosive liquids.

Summary of Contents for NVD-111










































Search results

Summary of Contents for NVD-111

Reviews:

Related manuals for NVD-111

Brands by name

Popular brands

Pepperl+Fuchs NVD-111, Manual

Search results

Summary of Contents for NVD-111

Reviews:

Related manuals for NVD-111

Brands by name

Popular brands