2
0
4
697
2
007
-0
9
12 - EN
LAYER THICKNESS SENSOR
Operation
EN
4
Operation
4.1
Emptying (disposal) of the container
The sensor is a sensitive component. Therefore always observe the following safety
information during emptying (disposal):
Caution!
Malfunction or damage through mechanical stress of the sensor.
In case of nonobservance, the safety and operation of the sensor or the entire alarm system is
not guaranteed.
•
Before emptying (disposal) the oil/petrol separator, remove the sensor from the container.
•
Protect the sensor against impacts, knocks and unnecessary tensile forces in the cable.
•
Insert the sensor in the oil/petrol separator only after it has been filled.
Layer thickness sensor
