manualshive.com logo in svg

Pepperl+Fuchs IRI-KHA6-4HB5, Manual

Share
Download
Pepperl+Fuchs IRI-KHA6-4HB5 Manual Download Page 11

IDENT-I • IRI-KHD2-4HB5, IRI-KHA6-4HB5

Product Description

Subject to reasonable modifications due to technical advances.

Copyright Fuchs, Printed in Germany

Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com

D

a

te

 of

 is

su

e

2

7.

08

.2

0

0

1

9

4

Product Description

4.1

Scope of delivery

The following is included with the delivery of the device:

• 1 device IRI-KHD2-4HB5/IRI-KHA6-4HB5

• 1 CD ROM including the manuals as PDF-file (german, english)  and the unit de-

scription for the commissioning software

• 1 terminal block

4.2

Areas of application

Bus systems, especially the INTERBUS, make the reduction of interconnection ca-
bling possible and allow large data exchange over long distances. The control inter-
face unit IRI-KHD2-4HB5/IRI-KHA6-4HB5 with an INTERBUS connection is 
unsurpassed when applied in large systems with many distant and distributed reading 
stations. 
Typical areas of application are:

• high-bay storage systems

• driverless transport systems

• interlinked production lines

• automatic container-identification

4.3

System description

The control interface unit IRI-KHD2-4HB5/IRI-KHA6-4HB5 takes over the control of 
the connected read heads that implement the data transmission with the code carri-
ers, prepares the read information and controls the communication and data trans-
mission with an INTERBUS master unit.

Figure 4.1

Function of the control interface unit IRI-KHD2-4HB5/IRI-KHA6-4HB5 
in the Inductive Identification System R

Summary of Contents for IRI-KHA6-4HB5









































Reviews:

No comments

Brands by name

Popular brands

Load more brands