2
0
1
8
-1
2
18
Installation
Mounting using OMH-LS610-01
The mounting aid (OMH-LS610-01) comprises a mounting bracket and a
preassembled adjustment device for the x and y direction. The adjustment device
is attached to the mounting bracket using two M4 nuts and a central M6 fixing
screw.
The adjustment device of the mounting aid enables the desired beam direction of
the optical data coupler to be set using
±
90
°
rotation. For details about
adjustment, see chapter 5.1.
LS68 housing dimensions*
LAN
Socket M12 x 1, 4-pin
D-coded
Service
Connector M12 x 1, 8-pin
A-coded
Power
Socket M12 x 1, 4-pin
A-coded
Earthing plate
Output Laser, class 1M laser product
Alignment aid
Receiver
171
170
81
90
36
97
.5
Caution!
Danger due to inadequate operating or adjustment equipment
Use of operating or adjusting equipment other than that specified here or
operating and adjusting procedures other than those described in this document
may result in harmful laser beam exposure.
Only use operating and adjustment equipment that is recommended for the
device described here. Follow the procedures described for this device
concerning operation and adjustment.
